Advertisement

Sign up for our daily newsletter

Advertisement

Cisco ws x6704 10ge weight loss: WS-X6704-10GE

Port buffers.

David Stewart
Sunday, April 25, 2021
Advertisement
  • We offer a standard day warranty on all items. Step 4 Grasp the edges of the memory module with your thumb and forefinger, and gently pull the memory module completely out of the socket.

  • Updated: February 27,

  • This section contains two DFC3 daughter card removal procedures. Step 4 Ensure that the connectors on the DFC3 are aligned with the connectors on the module.

  • Add to Cart.

Shop with confidence

It supports 64 Gbps of local switching, making it ideal for deployment in the core or aggregation layer of LAN campuses and data centers. Thanks, Dave. Last clearing of "show interface" counters 12w2d.

  • The exact distance supported varies according to the number of splices and connectors in a single-mode fiber strand.

  • Updated: January 19,

  • IEEE

  • XGB-LR 6.

Contact us for a price. Standard protocols. Cisco Catalyst Series 10 Gigabit Ethernet modules, when installed in a system, comply with the following EMC and safety standards:. Updated: January 19,

ALSO READ: Celebrity Weight Loss Secrets 2012 Chevy

Replacement hardware may be either new or equivalent to new and be identical or equivalent specifications. Items should be returned in their original condition. There should be saying multiple packages so that mean there will be another tracking number for the final destination. The copper module supports RJ connectors and provides operational distance of up to m over Category 6, 6A, and 7 type cabling. The cap nut acts as a stop when you unseat the daughter card connector so that the DFC3 daughter card does not move horizontally and cause damage to the base board. Failure to install all of the screws invalidates the safety approvals and presents a risk of fire and electrical hazard. Ensure the package has the RMA number visible on the outer box, otherwise, the package will not be accepted.

Table 4. Table Cisxo lists the fiber loss budgets for the GB X2 transceivers. The only thing I do to cause the packet loss is move the fiber from the GE ports to the TE ports and everything falls apart. The only restrictions are that each SFP port must match the wavelength specifications on the other end of the cable and that the cable must not exceed the stipulated cable length for reliable communications.

100-MB Transceivers

The only thing I do to cause the packet loss is move the fiber from the GE ports to the TE ports and everything falls apart. I have a really strange problem. Table B lists the cabling specifications for the X2 transceivers.

Did you mean:. In addition, they support hardware-based multicast replication, quality of service QoSaccess control lists ACLsjumbo frames, and low latency to enable secure and predictable performance for bandwidth-intensive applications. XGB-CX4 [5]. Create Content Login to create content.

Was this Document Helpful? If lose is no installation bracket, remove the two cap nuts and the one screw. Verify that the DFC daughter card is under the two stiffener bracket tabs. Push the memory module firmly back into the socket until the spring clips snap into place. This translation tool is for your convenience only.

Dimensions & Weight

Building on the award-winning Cisco Catalyst Series, these 10 Gigabit Ethernet modules are backward compatible with all existing Cisco Catalyst Series line cards and services modules, enabling enterprises and service providers to offer new Layer 2 through 7 services and network capabilities to increase revenue and user productivity without the need for major equipment upgrades. Caution Memory modules have sensitive components that are susceptible to ESD damage. Users can operate each port group in either oversubscription mode 2 to 4 ports used per port group or performance mode 1 port used per port groupproviding the flexibility to use some ports for connection to servers and other ports for interconnection of switches. DWDM X2 not available today. See details.

Cabling for CX4 Transceivers. Standard protocols. Cisco Community. Table B lists both GB transceiver types and the modules that support them. We are not responsible for weather problems that may affect the delivery of goods by carriers.

COM: 30 Days. I'm excluding vlan on the TE port since it has storage server traffic on it. Guarantee Satisfaction Guaranteed. To disable RFC optimization, use the no form of this com Add to Wishlist. It's single mode with LR transceivers. Operating temperature:.

Updated: February 27, Oversubscription mode:. Thanks, Dave. Refer to your software release notes for specific information on which WDM transceivers are supported and the software release level necessary to support them.

Table of Contents

Please choose your location for calculate shipping cost. Availability: In Stock. XGB-ER 5. Shipping costs and tax, if any, are not refundable.

Post Reply. Building on the award-winning Cisco Xisco Series, these 10 Gigabit Ethernet modules are backward compatible with all existing Cisco Catalyst Series line cards and services modules, enabling enterprises and service providers to offer new Layer 2 through 7 services and network capabilities to increase revenue and user productivity without the need for major equipment upgrades. It is also referred to as a media access unit MAU. Distributed Forwarding Card Upgrades. If we are unable to replace the product, we will refund its original selling price. New Factory Sealed.

Last clearing of "show interface" counters 12w2d. The WDM transceiver modules are listed in Table B along with brief descriptions of the transceiver modules and illustration references. Our warranty is void if the product is returned with damaged, removed, counterfeit labels, or any modifications including any component or external cover removal. Forwarding engine. You might be also interested. The switch protects the receiver from damage that may be caused by the transmitter output.

  • Third party trademarks mentioned are the property of their respective owners.

  • In performance mode, up to 4 10 Gigabit Ethernet ports can be used to create a virtual switch link in a VSS. My Cart Wishlist Login Login.

  • To prevent ESD damage, handle memory modules by the edges only; avoid touching the memory chips, pins, or traces the metal fingers along the connector edge of the SODIMM. Caution Do not press down too hard on the levers because they can bend and be damaged.

  • Hello, I have a really strange problem.

Failure to install all of the screws invalidates the safety approvals and presents a risk of fire and electrical hazard. Learn more - opens in a new window or tab. The screws provide grounding between the DFC3 daughter card and the module. Please contact us before bidding if you would like to use an alternate payment method. Note If the captive installation screws are loose, the electromagnetic interference EMI gaskets on the installed modules expand and push the modules toward the open slot, which reduces the opening size and makes it difficult to reinstall the module. Operating temperature:. Table 2 summarizes pluggable optics supported on the Cisco Catalyst Series 10 Gigabit Ethernet modules.

Or Sign In with social media. This is required for the return of all items to ORM Systems regardless of the reason for return. Prima di intervenire su 1ge apparecchiatura, occorre essere al corrente dei pericoli relativi ai circuiti elettrici e conoscere le procedure standard per la prevenzione di incidenti. Basket Total Item 0. For additional information, see the Global Shipping Program terms and conditions - opens in a new window or tab This amount includes applicable customs duties, taxes, brokerage and other fees. Installing an Ethernet Module in the Chassis.

Pluggable Transceiver Modules

Estimated delivery time: business days. Bale-clasp shown in the closed locked position. I'm trying to setup a 10G Add to Wishlist. WS-XGE packet loss.

  • Removing an Ethernet Module from the Chassis To remove an Ethernet module from the chassis, perform these steps: Step 1 Disconnect any network interface cables attached to the Ethernet module.

  • Unfortunately, successful attacks This product may have minor blemishes due to normal product usage and doesn't necessarily come with documentation and software unless indicated, but has been well tested and generally has never had any defects.

  • Step 4 Carefully slide the DFC3 under the two stiffener bracket tabs. Port buffers.

Regulatory compliance. Free Technical support on purchased items, our expert consultancy over the phone, by email, by live chat, or by remote login. To disable RFC optimization, use the no form of this com Contact us for a price. Products are brand new sealed and the original manufacturer box is complete with the Manufacturer's genuine warranty. Wireless Transceivers: Wireless transceivers are a fundamental component necessary for data delivery in wireless networks.

Contact us for a price. Related Cisco Community Discussions. Encapsulation ARPA, loopback not set. Claim S6704 to 2. Cisco Catalyst Series 10 Gigabit Ethernet modules, when installed in a system, comply with the following EMC and safety standards:. Free Technical support on purchased items, our expert consultancy over the phone, by email, by live chat, or by remote login.

Updated: February 27, This product may have minor blemishes due to normal product usage and doesn't necessarily come with documentation and software unless indicated, but has been well tested and generally has never had any defects. I'm trying to setup a 10G Slot requirements.

I/O Expansions:

Contact seller. It supports 64 Gbps of local switching, making it ideal for deployment in the core or aggregation layer of LAN campuses and data centers. The seller has not specified a shipping method to Ukraine. The copper module supports RJ connectors and provides operational distance of up to m over Category 6, 6A, and 7 type cabling.

Send products to e-mail: Send. Table B lists the physical and environmental 110ge for the X2 transceiver. The only thing I do to cause the packet loss is move the fiber from the GE ports to the TE ports and everything falls apart. About Refurbished Products Refurbished products are typically refurbished by an Original Manufacturer or an affiliate of the manufacturer or 3rd party facility. See Figure B-7 for the serial number location.

Maximum port density per VSS. Distributed Forwarding Card-3B. Product Specifications. The warranty period starts when the merchandise is shipped from our warehouse. Forwarding engine.

  • Items should be returned in their original condition.

  • The Cisco Catalyst Series 10 Gigabit Ethernet modules are designed for deployment in the distribution and core of the campus and data center for traffic aggregation, or for interbuilding, points of presence POPsWAN edge, and metropolitan area network MAN connections. Cisco offers a wide range of services programs to accelerate customer success.

  • There are 1 items available. Note If the captive installation screws are loose, the electromagnetic interference EMI gaskets on the installed modules expand and push the modules toward the open slot, which reduces the opening size and makes it difficult to reinstall the module.

In local area networks LANa transceiver is used to connect a computer to printers and other devices on the network. Was this Document Helpful? Table 1. Different types of transceivers will have varying numbers of ports used in transceiver networking connections.

The copper module supports RJ connectors and provides operational distance of up to m over Category 6, 6A, and 7 type cabling. Seller Table 2 summarizes pluggable optics supported on the Cisco Catalyst Series 10 Gigabit Ethernet modules. This step ensures that the space created by the removed module is maintained.

Add to cart Add to Wishlist. About Refurbished Products Refurbished products are typically refurbished by an Original Manufacturer or an affiliate of the manufacturer or 3rd party facility. Related Content. The switch protects the receiver from damage that may be caused by the transmitter output.

View Tracking. Distributed Forwarding Card Upgrades. Place your thumbs on the ejector levers located at the top and bottom of the Ethernet module, and simultaneously rotate the levers outward to unseat the Ethernet module from the chassis backplane connector. Related Cisco Community Discussions.

Switch fabric connection. Blogs Networking Blogs Networking News. XGB-SR 6. Download Options. The only restrictions are that each SFP port must match the wavelength specifications on the other end of the cable and that the cable must not exceed the stipulated cable length for reliable communications. X2 Optics. The warranty period starts when the merchandise is shipped from our warehouse.

You may also be interested in the following product(s)

Please enter 5 or 9 numbers for the ZIP Code. A listing of Cisco's trademarks can be found at www. Layer 2.

  • Step 6 After the memory module is installed, check that both spring clips are fully engaged.

  • The problem lies somewhere between the 2 routers.

  • View Tracking.

  • Table B lists the physical and environmental specifications for the X2 transceiver.

Add to Cart. Layer 3. Wireless Transceivers: Wireless transceivers are a fundamental component necessary for data delivery in wireless networks. To determine the supported link distance, you need to measure your cable plant with an optical loss test set to verify that the optical loss of the cable plant including connectors and splices is less than or equal to this value.

  • The cap nut acts as a stop when you unseat the daughter card connector so that the DFC3 daughter card does not move horizontally and cause damage to the base board.

  • Last clearing of "show interface" counters 11w1d. Ethernet transceivers will detect a collision, provide Ethernet interface processing, convert digital data, and provide access to the network.

  • Step 1 Disconnect any network interface cables attached to the Ethernet module.

  • Figure 4. The second layer is a MAC layer for link traffic control in contacting wireless links, improving data throughput, and preventing collisions.

Before you work on any equipment, be aware of the hazards involved with electrical circuitry and be familiar with standard practices for preventing accidents. Voordat u aan enige apparatuur gaat werken, dient u zich bewust te zijn van de bij elektrische schakelingen betrokken risico's en dient u op de hoogte te zijn van de standaard praktijken om ongelukken te voorkomen. Once you have received your RMA number, securely repackage the items in the same way they were sent to you ideally inside the original outer box. If goods are visibly damaged on receipt, it is very important to sign for the goods as damaged on arrival with the courier, and then contact us immediately.

Caution During this procedure, wear grounding wrist straps to avoid ESD damage to the card. For additional weighht, see the Global Shipping Program terms and conditions - opens in a new window or tab. Step 5 Remove the remaining installation hardware. Performance mode:. After you made purchase, surcharge will be calculated by using the package weight and size. Cisco offers a wide range of services programs to accelerate customer success.

AI Face Recognition Device OT-2000

Visit store. Once the item has been returned, we will test it and fix the problem. Get the item you ordered or get your money back. After you made purchase, surcharge will be calculated by using the package weight and size. Apply pressure only to the top of the bracket to fully seat the DFC3 daughter card on the module as shown in Figure

Wireless Transceivers: Wireless transceivers are a fundamental component necessary for data delivery in wireless networks. This product may have minor blemishes due to normal product usage and doesn't necessarily come with documentation and software unless indicated, but has been well tested and generally has never had any defects. No restrictions for use. The fiber modules support pluggable optics and provide operational distances of up to 80 km over single-mode fiber and m over multimode fiber. Showing results for. For urgent shipments, please contact our customer service. EMC Standards:.

Below is the relavant configuration from both routers. The exact distance supported varies according to the number of splices and connectors in a single-mode fiber strand. Building a fiber-optic network calls for a lot of planning and consideration of many factors. Normally, the ports support X2 transceivers. X2 Part Number. IEEE Standard.

Send products to e-mail: Send. Free Technical support on purchased items, our expert consultancy over the phone, by email, by live chat, or by remote login. Skip to content Skip to footer. Inventory We ship from multiple warehouses. IEEE

  • Set them aside with the bracket.

  • Building a fiber-optic network calls for a lot of planning and consideration of many factors. Com warranty cover?

  • Basket Total Item 0. After you made purchase, surcharge will be calculated by using the package weight and size.

  • ESD grounding straps are available with banana plugs, metal spring clips, or alligator clips.

  • Utilizzare il numero di istruzione presente alla fine di ciascuna avvertenza per individuare le traduzioni delle avvertenze riportate in questo documento.

Step 7 With your left hand, lift slightly at the location shown in Self hypnosis for weight loss reviews 5. The ejector levers are fully closed when they are flush with the Ethernet module faceplate. Step 5 Align the mounting holes on the DFC3 daughter card with the male standoffs on the module. Product Specifications. Learn more. Cancellation Policy If a consumer or business account wishes to cancel a web order there will be no charge for doing so if you email us, quoting the order reference number or your PO number, before the item is dispatched. Learn More - opens in a new window or tab Any international shipping and import charges are paid in part to Pitney Bowes Inc.

Step 5 Align the mounting holes on the DFC3 daughter card with the cisco ws x6704 10ge weight loss standoffs on the module. This step ensures that the space created by the removed module is maintained. Contact Seller. While gently pressing down, simultaneously close the left and right ejector levers to fully seat the Ethernet module in the chassis backplane connector. Step 3 Release the two spring clips on either side of the memory module to release it from the socket. All rights reserved.

Vendor Login Vendor Registration. Users can operate each port group in either oversubscription mode 2 to 4 ports used per port group or performance mode 1 port used per port groupproviding the flexibility to use some ports for connection to servers in performance mode and others for uplinks to wiring closets in oversubscription mode. Download Options. All accessories, manuals, software, and warranties should also be enclosed in their original packaging and should be undamaged. Dette advarselssymbol betyder fare. Step 3 Align the mounting holes on the DFC3 daughter card see Figure 14 with the male standoffs on the module. Step 1 Disconnect any network interface cables attached to the Ethernet module.

Shop by category

The two ports normally accepts X2 Gigabit transceivers. Inventory We ship from multiple warehouses. Used to transmit data in fiber optic technology. My Cart Wishlist Login Login.

  • NEBS criteria levels.

  • They are most common in communication equipment such as cellular phones, cordless telephone sets, and radio.

  • Step 4 Use a Phillips-head screwdriver to remove the installation hardware, which consists of three securing screws and the two cap nuts.

  • Add to cart Add to Wishlist.

  • Whenever you interact with us, we will receive and put down the given information. The ejector levers are fully closed when they are flush with the Ethernet module faceplate.

Available Languages. Carefully slide the Ethernet lods into the slot until the EMI gasket along the top edge of the module makes contact with the module in the slot above it and both ejector levers have engaged and closed to approximately 45 degrees with respect to the Ethernet module faceplate. Step 5 Apply pressure to the area shown in Figure 17 to seat the power connector. See Figure

Step 5 Align the mounting holes on the DFC3 daughter card with the male standoffs on the module. Step 8 Remove the one cap nut. If we, at cisco ws x6704 10ge weight loss absolute discretion, agree to accept the return for credit of unwanted products, the Goods must be returned with our prior written agreement within fourteen days of delivery. Note The DFC3 daughter card is designed to be installed on different modules; therefore, there may be more mounting holes on the DFC3 daughter card than there are standoffs on the module. Warning Only trained and qualified personnel should be allowed to install, replace, or service this equipment.

WWDM nm. Cisco Catalyst Series 10 Gigabit Ethernet modules, when installed in a system, comply with the following EMC and safety standards:. This section contains two DFC3 daughter card removal procedures.

It supports loes Gbps of local switching, making it ideal for deployment in the core or aggregation layer of LAN campuses and data centers. In reality, OSPF is a link-state routing protocol only within an area intra-area ; but almost a distance-vector routing protocol be Table B lists the fiber loss budgets for the GB X2 transceivers. Table 1 summarizes the primary features and benefits of the Cisco Catalyst Series 10 Gigabit Ethernet modules.

Step 6 Position the installation bracket over the two male standoffs at the back of the DFC daughter card. Get the item you ordered or get your money back. Or Sign In with social media. Place your thumbs on the ejector levers located at the top and bottom of the Ethernet module, and simultaneously rotate the levers outward to unseat the Ethernet module from the chassis backplane connector. Item Information Condition:.

X2 Optics. XGB-LR 6. ALLHDD guarantees that the products will not have defects in material or workmanship that will affect the product's functionality during the Standard Warranty Period. XGB-SR 6.

Cancellation Policy If a consumer or business account wishes to cancel a web order there will be no charge for doing so if you email us, quoting the order reference number or your PO number, before the item is dispatched. If the item has already been dispatched, then the best advice does not open the shipment when it arrives. U verkeert in een situatie die lichamelijk letsel kan veroorzaken. Press down only on the installation bracket.

ALSO READ: Hula Hoop Weight Loss Routine

Step 6 After the memory module is installed, check that both spring clips are fully cisxo. The cap nut acts as a stop when you unseat the daughter card connector so that the DFC3 daughter card does not move horizontally and cause damage to the base board. Seller XGB-LR 6. Users can operate each port group in either oversubscription mode 2 to 4 ports used per port group or performance mode 1 port used per port groupproviding the flexibility to use some ports for connection to servers and other ports for interconnection of switches. Using the thumb and forefinger of each hand, grasp the two ejector levers and press down to create a small 0.

Caution Do not apply too much pressure on the tabs because you might cause damage to the module. To prevent ESD losd, handle memory modules by the edges only; avoid touching the memory chips, pins, or traces the metal fingers along the connector edge of the SODIMM. Step 1 Attach the ESD wrist strap to bare skin as follows:. The measurement should be between 1 and 10 megohm Mohm. All Catalyst series chassis are equipped with a banana plug connector identified by the ground symbol next to the connector somewhere on the chassis front panel. Table 1 summarizes the primary features and benefits of the Cisco Catalyst Series 10 Gigabit Ethernet modules. The screws provide grounding between the DFC3 daughter card and the module.

Ethernet transceivers will detect a collision, provide Ethernet interface processing, convert digital data, and provide access to the network. Table B-5 cabling specifications Table B-6 fiber loss budgets Table B-7 environmental specifications. This only occurs on the TE ports. Showing results for.

When your Internet browser visits, we will collect some information. Step 4 Loosen the two captive installation screws on the Ethernet module. Tilanne voi aiheuttaa ruumiillisia vammoja. Step 7 With your left hand, lift slightly at the location shown in Figure 5. Maximum port density per VSS.

Operating altitude:. Hopefully someone can help me shed some light on this as its the strangest problem I've ever seen. Table 1 summarizes the primary features and benefits of the Cisco Catalyst Series 10 Gigabit Ethernet modules. Safety Standards:. See Figure B-7 for the serial number location. Distributed Forwarding Card-3C. X2 Part Number.

If we are unable to replace the product, we will refund its original selling price. We guarantee our customers high quality and reliability for all our transceiver networking solutions, irrespective of the type and size of your network. Part Numbers for Ordering. Transceiver Type.

All Community This category This board. Free Technical support on purchased items, our expert consultancy over the phone, by email, by live chat, or by remote login. Last clearing of "show interface" counters 11w1d. Add to Cart Request quote Add to Wishlist. Cisco offers a wide range of services programs to accelerate customer success. Contact us for a price.

In this case, please raise an RMA Return Merchandise Authorization request by agreeing to the terms and conditions below. This section contains two DFC3 daughter card removal procedures. Safety Standards:. X2 Optics. This section provides an overview and specifications of the DFC daughter cards. Step 5 Immediately place the old memory module in an antistatic bag to protect it from ESD damage. Statement —Warning Definition.

For additional information, see the Global Shipping Program terms and conditions - opens in a new window or tab This amount includes applicable customs duties, taxes, brokerage and other fees. Hardware-based multicast replication Layer 2. XGB-LR 6. Once you have received your RMA x67044, securely repackage the items in the same way they were sent to you ideally inside the original outer box. We recommend that you touch the clip to an unpainted rack rail so that any built-up static charge is then safely dissipated to the entire rack. Step 2 Remove the Ethernet module from the Catalyst series switch. To prevent ESD damage, handle memory modules by the edges only; avoid touching the memory chips, pins, or traces the metal fingers along the connector edge of the SODIMM.

Look no further for all types of transceivers including fiber optic transceivers, wireless transceivers, Ethernet transceivers, and RF transceivers. Normally, the ports support X2 transceivers. IEEE

The best application of these transceivers is losss the specification of IEEE Layer 3. IEEE Standard. I'm excluding vlan on the TE port since it has storage server traffic on it. It is typically included in the price of the product. The two ports normally accepts X2 Gigabit transceivers. PDF - Complete Book 7.

United States and many other countries See details. Oversubscription mode:. Locate the end of the wrist strap that attaches to your body and secure it to your bare skin. These parts are included in the DFC3 daughter card upgrade kit:. These innovative services programs are delivered through a unique combination of people, processes, tools, and partners, resulting in high levels of customer satisfaction. Dieses Warnsymbol bedeutet Gefahr.

Sidebar1?
Sidebar2?